Study the exhibit shown below carefully. A Cisco Aironet Wireless LAN Client Adapter has been installed and configured through the ADU on the PC. The Aironet System Tray Utility (ASTU) has been enabled during the installation and the icon appears in the system tray area in the lower right of the desktop as shown:
What is the significance of this icon? ()
A. It indicates that the client adapter is not associated to an access point or another client.
B. It indicates that the radio of the client adapter is disabled.
C. It indicates that the client adapter is associated to an access point or another client, but the user is not EAP authenticated.
D. It indicates that the client adapter is associated to an access point or another client, that theuser is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is poor.
E. It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is fair.
F. It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is excellent or good.
您可能感興趣的試卷
你可能感興趣的試題
Which three statements are true about implementing wireless LANs in the Company network using Cisco devices?()
A. Antenna power is a relative value reference to dBi.
B. LWAPP allows encrypted communications between lightweight access points and WLAN controllers.
C. Characteristics of antennas are directionality, gain, and polarization.
D. Power over Ethernet (PoE) is only available when a WLAN controller is integrated into the network.
E. The WLAN solution Engine (WLSE) is used to control lightweight access points.
F. One of the advantages of the lightweight WLAN solution is that the devices act indepently.
Under which three conditions does a client initiate roaming between wireless cells in the Company WLAN? ()
A. The access point has broadcast too many SSIDs.
B. The wireless client has missed too many beacons from the access point.
C. The maximum data retry count, initiated by the wireless client, is exceeded.
D. The wireless client has reduced the data rate.
E. The access point has requested client reauthentication.
F. The wireless client has missed too many IAPP (Inter Access Point Protocol) updates.
Refer to the exhibit. The wireless user is moving from right to left towards AP2.
What are three reasons that the wireless client would initiate roaming?()
A. The minimum data retry count from AP1 is exceeded.
B. The maximum data retry count from AP1 is exceeded.
C. The client has missed too many beacons from AP1.
D. The client data rate from AP1 has been reduced.
E. The client has received too many beacons from AP2.
F. The client data rate from AP2 has been increased.
Refer to the exhibit.
Which protocol establishes an optimal path to the root in a wireless mesh network? ()
A. Adaptive Wireless Path (AWP)
B. WLAN Quality of Service (WQoS)
C. Lightweight Access Point Protocol (LWAPP)
D. 802.1Q WLAN trunking protocol
E. Layer 2 Roaming (IAPP)
Refer to the exhibit.
Which statement is true about the repeater access point that is deployed in this wireless network?()
A. The repeater access point should use a different SSID than the SSID configured on the parent access point.
B. The repeater access point reduces the throughput in half because it receives and then retransmits each packet on the same channel.
C. The repeater access point requires a 10 percent channel overlap with channel of the root access point.
D. The repeater access point should use a different WEP encryption method than the WEP encryption that is enabled on the parent access point.
In the Company wireless LAN,
what is the function of the Service Set Identifier (SSID)?()
A. The SSID must match on both the Company client and the Company access point and provides MAC Address Authentication to authenticate the client to the access point.
B. The SSID should be configured on the Company client site only and provides data-privacy functions and authentication to the access point.
C. The SSID must match on both the Company client and the Company access point and provides encryption keys for authentication to the access point.
D. The SSID must match on both the Company client and the Company access point. The SSID is advertised in plain-text in the access point beacon messages.
E. None of the other alternatives apply
You work as a network technician at Company. Your boss, Ms. , is interested in the Aironet enterprise solutions.
What should you tell her regarding this?()
A. The Cisco Aironet AP handles real-time portions of the LWAPP protocol, and the WLAN controller handles those items which are not time sensitive.
B. A Cisco Aironet AP handles the transmission of beacon frames and also handles responses to probe-request frames from clients.
C. Virtual MAC architecture allows the splitting of the 802.11 protocol between the Cisco Aironet AP and a LAN switch.
D. A Cisco Aironet solution includes intelligent Cisco Aironet access point (APs) and Cisco Catalyst switches.
E. In the Cisco Aironet solution, each AP is locally configured by the use of either a web interface or the command line interface.
pany is deploying a Cisco autonomous WLAN solution in their network.
Which three components are included in this solution?()
A. Wireless Domain Services (WDS)
B. Access Control Server (ACS)
C. Lightweight Access Point Protocol (LWAPP)
D. Wireless LAN solution Engine (WLSE)
E. Wireless Services Module (WISM)
F. Wireless Control System (WCS)
You need to set up a Company AP to act as a wireless repeater.
What are three characteristics of this wireless repeater topology?()
A. The recommended overlap of the access point on the wired LAN and the wireless repeater is 25%.
B. Autonomous access points are required.
C. The SSID of the root access point must be configured on the repeater access point.
D. The recommended overlap of the access point on the wired LAN and the wireless repeater is 50%.
E. Lightweight access points are required.
F. The recommended overlap of the access point on the wired LAN and the wireless repeater is 75%.
G. The SSID of the root access point must be distinct from that of the repeater access point.
Which two features or capabilities are valid options for both an Autonomous WLAN solution and a Lightweight WLAN solution? ()
A. PoE capability
B. Use of Cisco Secure Access Control Server (ACS) for security
C. Cisco IOS software for configuration
D. Cisco Wireless Control System (WCS) for management
E. Use of a Cisco Wireless Location Appliance location for tracking
最新試題
Refer to the exhibit. What does the command channel-group 1 mode desirable do? ()
What is the configured priority value of the Vlan105’s group on DS2 ?()
Refer to the exhibit. For what purpose is the command show ip cef used?()
Refer to the exhibit. On the basis of the output of the show spanning-tree inconsistentports command, which statement about interfaces FastEthernet 0/1 and FastEthernet 0/2 is true?()
Examine the diagram. A network administrator has recently installed the above switched network using 3550s and would like to control the selection of the root bridge.Which switch should theadministrator configure as the root bridge and which configuration command must theadministrator enter to accomplish this?()
Based on the show spanning-tree vlan 200 output shown in the exhibit, which two statements about the STP process for VLAN 200 are true? ()
Refer to the exhibit. Based on the output of the show spanning-tree command, which statement is true? ()
Refer to the exhibit. STP has been implemented in the network. Switch SW_A is the root switch for the default VLAN. To reduce the broadcast domain, the network administrator decides to split users on the network into VLAN 2 and VLAN 10. The administrator issues the command spanning-tree vlan 2 root primary on switch SW_A. What will happen as a result of this change?()
Refer to the exhibit. What command was issued on the Layer 3 switch Sw1 between Exhibit #1 and Exhibit #2?()
If G1/0/1 on DS1 is shutdown, what will be the current priority value of the Vlan105’s group on DS1 ?()