A. There is insufficient room for more than one image.
B. The router has detected a copy of the current software image on the TFTP server.
C. The file can be relocated and not compressed.
D. The image to load is a binary executable file.
您可能感興趣的試卷
你可能感興趣的試題
A. Hub
B. Switch
C. Bridge
D. NIC
E. Transceiver
A. frame-relay arp
B. frame-relay map
C. frame-relay interface-dlci
D. frame-relay lmi-type
A. it will search for the configuration file in the locations specified by boot system commands.
B. it will search for the configuration file in flash and if no configuration file is found there, it will enter the setup dialog.
C. it will search for the configuration file on a TFTP server and if no configuration file is found there, it will enter the setup dialog.
D. it will search for the configuration file in flash and if no configuration file is found there, it will load a limited configuration file from ROM.
E. it will search for the configuration file on a TFTP server and if no configuration file is found there, it will load a limited configuration file from ROM.
A. The router will use the static route.
B. The router will use the OSPF route.
C. The route will use the EIGRP route.
D. The router will load balance and use all three routes.
A. store and forward
B. fragment-free
C. adaptive cut-through
D. fast-forward
A. it avoids split-horizon issues with distance vector routing protocols.
B. IP addresses can be conserved if VLSM is not being used for subnetting.
C. A multipoint interface offers greater security compared to point-to-point subinterface configurations.
D. The multiple IP network addresses required for a multipoint interface provide greater addressing flexibility over point-to-point configurations.
A.transparent
B.auto
C.on
D.desirable
E.client
F.forwarding
A.buffering
B.cut-through
C.windowing
D.congestion avoidance
E.loadbalancing
A. The ip classless command is enabled by default in recent versions of IOS.
B. The ip classless command should only be enabled when static routing is being used instead of a routing protocol.
C. The ip classless command should be enabled by the network administrator whenever RIPv1 or IGRP is being used.
D. The ip classless command should be enabled by the network administrator whenever OSPF, RIPv2, or EIGRP is being used.
A.1
B.10
C.1562
D.64000
E.128000
最新試題
Which of the following describe router functions?（）
Which of the following correctly describe steps in the OSI data encapsulation process?（）
Which of the following if addresses can be assigned to host devices?（）
How many usable sub network and usable hosts per subnet result in the network address 201.105.13.0 is sub netted with a mask of /26? （）
All WAN links is side the TestKing.com network use PPP with for authentication security. Which command will display the CHAP authentication process as it occurs between two routers in the network?（）
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? （）
A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?（）
Which connections allow the use of full-duplex Ethernet?（）
The following access list was applied outbound on he E0 interface connected to the 192.168.1.8/29 LAN:access-list 123 deny tcp 192.168.1.8 0.0.0.7 eq 20 anyaccess-list 123 deny tcp 192.168.1.9 0.0.0.7 eq 21 anyWhat effect will this access list have?（）
An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）