A. Transport layer divides a data stream into segments & adds reliability & flow control information
B. Data link layer adds physical source & destination address & an FCS to the segment
C. Packets are created when the network layer encapsulate a frame with source & destination host address& protocol related control information
D. Packets are created when the network layers adds layers 3 address & control information to a segment
E. The presentation layer translated bits into bits into voltages for transmission across the physical link
您可能感興趣的試卷
你可能感興趣的試題
A. The Boot IOS Code is Located in the NVRAM.
B. Check NVRAM for boot system Commands.
C. Bypass NVRAM Configurations.
D. Boot the IOS Code Located in ROM.
E. Perform a Password Recovery.
F. Bypass The Code In ROM.
A. show CHAP authentication
B. show interface serial 0
C. debug PPP authentication
D. debug CHAP authentication
E. show PPP authentication CHAP
A. 205.7.8. 32/27
B. 191.168. 10. 2/23
C. 127.0.0.1
D. 224.0.0.10
E. 203.123.45. 47/28
F. 10.10.0.0/13
A. 64 network and 4 hosts
B. 4 network and 64 hosts
C. 2 network and 62 hosts
D. 62 network and 2 hosts
A.TE1
B.TE2
C.NT1
D.NT2
A. 199.141.27.33
B. 199.141.27.112
C. 199.141.27.119
D. 199.141.27.126
E. 199.141.27.175
F. 199.141.27.208
A. The switch name must match the workgroup name of the local network.
B. The switch must be configured with an IP address and default gateway.
C. The remote workstations must have access to the management VLAN of the switch.
D. CDP must be enabled on the switch so that it can be located by other devices on the network.
A. show access-list
B. show ip route
C. show ip interface
D. show interface
E. show interface list
F. show ip interface brief
A. To restart the router.
B. To bypass the configuration in NVRAM.
C. To view the lost password.
D. To save the changes to the configuration.
E. To enter ROM Monitor mode.
A. cut-through
B. fragment-free
C. frame-filtering
D. store-and-forward
E. 802.1q forwarding
F. VTP transparent mode
最新試題
A router with a serial interface will be used for an ISDN link.What other function group devices are required to complete the connection to the service provider? （）
What should the configuration register value be after successfully completing the password recover procedure and returning the router to normal operation? （）
What does a configuration Register Setting of 0x2105 indicate to the Router? （）
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? （）
Which of the following if addresses can be assigned to host devices?（）
A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?（）
What is the subnetwork address for a host with IP address 201.100.5.68/28?（）
Which connections allow the use of full-duplex Ethernet?（）
Which of the following correctly describe steps in the OSI data encapsulation process?（）
What feature of a networks switch allows an administrative to create separate broadcast domains?（）