A.data/coverage
B.voice
C.location
D.mesh
E.public
F.WPAN
您可能感興趣的試卷
你可能感興趣的試題
A.13 dBm
B.19 dBm
C.25 dBm
D.31 dBm
A.photographs
B.floor plans
C.wired network layout
D.blueprints
A.0.25 W
B.0.45 W
C.1 W
D.1.25 W
E.2.45 W
F.5.65 W
A.#6 solid copper
B.#12 solid copper
C.#20 solid copper
D.#22 solid copper
A.1/6
B.1/4
C.1/3
D.1/2
A.less than 10 percent
B.10 to 15 percent
C.15 to 20 percent
D.25 to 30 percent
A.Class A
B.Class 1
C.Class 2
D.Class 3
E.Class 4
A.5 to 10 percent for both 2.4 GHz and 5 GHz
B.10 percent for both 2.4 GHz and 5 GHz
C.20 percent for 2.4 GHz and 15 to 20 percent for 5 GHz
D.20 percent for 2.5 GHz and 10 percent for 5 GHz
A.1， 4， 7， 11
B.1， 4， 8. 11
C.1， 6， 11， 1
D.2， 4， 6， 8
A.AP1130
B.AP1242
C.AP1252
D.BR1310
最新試題
A design requires 100 access points with high channel bandwidth and disabled lower data rates.How are the data rates set on the Cisco WLC and Cisco WCS？（）
In an outdoor bridge link， what is calculated by using this formula： transmitter power + antennagain - insertion OR cable loss（）？
How is attenuation measured？（）
What is the minimum recommended access point overlap for voice roaming？（）
When planning for voice deployments with the Cisco Unified Wireless IP Phone 7921G handset in amultifloor building with a WLAN that operates at an 11 MB/s data rate， how many decibelsreferenced to 1 milliwatt of same-channel separation are recommended between floors？（）
In which three frequency bands does the Cisco Spectrum Expert Wi-Fi tool perform spectrumanalysis？ （）
Which format can NOT be imported into Cisco WCS Planning Tool？（）
After the site installation is complete， you should verify the mobility of the VoWLAN device whilewalking the site on an active phone call. Which Cisco WLC or Cisco WCS command is mostbeneficial in determining roaming efficiency？（）
Which three items does the Cisco WCS Planning Tool Generate Proposal Report provide？（）
For an active Cisco Unified Wireless IP Phone 7921G 5 GHz site survey， what are the mostappropriate client test settings to use with the AirMagnet site survey tool？（）