單項選擇題What is the benefit of using Anycast RP via RFC 4610 for IP multicast RP redundancy?()    

A. Improves convergence of the multicast network due to enhanced RPF checks
B. Simplifies the number of control plane protocols over other RP redundancy methods
C. Eliminates the use of Protocol Independent Multicast (PIM) in the topology
D. Increases the administrative distances in Multicast Source Discovery Protocol (MSDP) configuration


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題

2012 Feb 23 23:00:08.676710 pim: [16132] (default-base) Received unauthenticated hello- message from 10.1.1.2 on Ethernet1/18, message discarded 2012 Feb 23 23:00:12.528763 pim: [16132] (default-base) Send Hello with AH on Ethernet1/18 from 10.1.1.1, holdtimE. 105 secs,dr-priority:1 
You are troubleshooting a PIM neighbor adjacency that is not coming up. You issued the command show ip pim neighbor e1/18 and confirmed there is no PIM neighbor on the interface. What is the problem based on the debug output?()

A. The peer router 10.1.1.2 has PIM disabled on its interface connecting to Ethernet1/18.
B. The peer router 10.1.1.2 has the wrong PIM password configured on its interface connecting to Ethernet1/18.
C. The local router 10.1.1.1 has the wrong PIM password configured on Ethernet1/18.
D. The peer router 10.1.1.2 does not have PIM hello authentication enabled on its interface connecting to Ethernet1/18.
E. The local router 10.1.1.1 does not have PIM hello authentication enabled for Ethernet1/18.

2.單項選擇題On the Cisco Nexus 7000 Series Switch, Control Plane Policing is enforced on which component?()

A. The supervisor module enforces CoPP before out-of-policy traffic reaches the CPU
B. The fabric modules enforce CoPP in the fabric before out-of-policy traffic reaches the CPU 
C. The linecards enforce CoPP locally before out-of-policy traffic reaches the CPU
D. The egress virtual output queue enforces CoPP locally before out-of-policy traffic reaches the CPU

3.單項選擇題On Cisco Nexus 5000 Series Switches, where are the virtual output queues implemented, and what is the main purpose of virtual output queues?()

A. on all ingress interfaces; to ensure maximum throughput on a per-egress, per-CoS basis
B. on all ingress interfaces; to provide independent congestion management and 16 queues
C. on all egress interfaces; so that a congested egress port does not affect traffic directed to other egress ports
D. on all egress interfaces; to prevent head-of-line blocking by utilizing multiple virtual output queues
E. on all egress interfaces; to be able to use EEE 802.1p CoS

4.單項選擇題n a virtual port channel (vPC) configuration, VRRP exhibits which characteristic? ()

A. VRRP does not work with vPC due to industry standard requirements
B. VRRP works with vPC in traditional active/standby modes
C. VRRP works with vPC in an active/active mode
D. VRRP work with vPC as long as vPC peer-gateway is configured to address non-standard replies to the physical MAC address

5.單項選擇題What does the mac packet-classify command do when applied to an interface configuration?()

A. It enables MAC ACLs to be applied to only IP packets that enter the interface.
B. It enables MAC ACLs to be applied to only non-IP packets that enter the interface.
C. It enables MAC ACLs to be applied to all packets that enter the interface.
D. It enables MAC ACLs to be used for QoS settings.

6.單項選擇題What tasks can only be performed in the default or admin VDC?()

A. EPLD upgrade, IOS ISSU, FCoE feature enablement, CoPP configuration, and rolling back a checkpoint
B. EPLD upgrade, Cisco IOS ISSU, FCoE feature enablement, CoPP configuration, and ACL capture enablement
C. EPLD upgrade, Cisco IOS ISSU, FCoE feature enablement, CoPP configuration and SNMP configuration
D. EPLD upgrade, Cisco IOS ISSU, FCoE feature enablement, CoPP configuration, and write erase

7.多項選擇題Which two are benefits of using remote AAA services for Cisco Nexus products? ()

A. They make it easier to manage user logins and passwords across devices.
B. They enable automated configuration backup for devices.
C. They centrally manage user attributes and permissions.
D. Local console access is never included in AAA and can be used for access when the AAA servers are down.

8.單項選擇題Which description is correct for a private VLAN community port with respect to Layer 2 communications?()   

A. It communicates with all other community ports in the private VLAN domain.
B. It communicates with only isolated ports in the private VLAN domain.
C. It communicates only with other community ports in the same community and associated promiscuous ports.
D. It communicates only with associated promiscuous and isolated ports.

9.單項選擇題

After configuring FabricPath, the following appears in the syslog: 
%STP-2-L2GW_BACKBONE_BLOCK: L2 Gateway Backbone port inconsistency blocking port port-channel100 on VLAN0010. 
What is the cause of this message? ()

   

A. STP must be disabled; message indicates that STP is enabled.
B. STP is misconfigured; root guard must be disabled.
C. An inferior BPDU is received on a Cisco FabricPath edge port.
D. A superior BPDU is received on a Cisco FabricPath edge port.

最新試題

Which statements are true regarding the Cisco UCS fabric failover feature? ()

題型:多項選擇題

Refer to the exhibit.Your company requires a Cisco UCS configuration that will, at a minimum, allow the configuration in the provided exhibit.  Which Cisco UCS components will meet the requirement?()

題型:多項選擇題

When will an "all configuration" backup be imported into the Cisco UCS Manager?()

題型:單項選擇題

Which statement is true regarding Backup tasks in Cisco UCS?()

題型:單項選擇題

What interface is created when an FC Port Channel is created on a Cisco Unified Computing System?()

題型:單項選擇題

In a Cisco Unified Computing System, What is the "designated receiver" port in end-host mode used for?()

題型:單項選擇題

Which is true when describing a connection replication in Cisco ACE?()

題型:單項選擇題

Given a Cisco Unified Computing System, which is a valid port type in end-host mode?()

題型:單項選擇題

An administrator is creating a service profile but receives an error when applying to a blade. The administrator checks the faults tab of the service profile and finds the following error (Refer to the exhibit).What is the cause of this error?()

題型:單項選擇題

Refer to the exhibit. According to the equipment tab in Cisco UCS Manager, which is true?()    

題型:單項選擇題