單項選擇題

The EIGRP network is displayed in the following topology diagram:

You work as a network technician. Study the exhibits carefully. If the command "variance 3" wasadded to the EIGRP configuration of R5, which path or paths would be chosen to route traffic fromR5 to network X?()

A.R5-R2-R1
B.R5-R2-R1 and R5-R3-R1
C.R5-R3-R1 and R5-R4-R1
D.R5-R2-R1,R5-R3-R1, and R5-R4-R1


您可能感興趣的試卷

你可能感興趣的試題

2.單項選擇題

The network is shown below, along with the relevant router configurations:

With the topology found in the graphic, what will the R1 loopback 0 be in the R3 routing table?()

A.It will show up in the routing table as D 10.0.0/8
B.It will show up in the routing table as D EX 10.0.0.0/8
C.It will show up in the routing table as D 10.0.0./24
D.It will not show up in R3 routing table because there is no network command on R1

3.單項選擇題Which IOS command would you enter if you wanted to view a list of IBGP and EBGP neighbor relationships that are configured()

A.show ip bgp
B.show ip bgp paths
C.show ip bgp peers
D.show ip bgp summary
E.show ip bgp protocols

6.多項選擇題EIGRP is being used as the routing protocol on the company network. While troubleshooting somenetwork connectivity issues, you notice a large number of EIGRP SIA (Stuck in Active) messages.What causes these SIA routes?()

A.The neighboring router stops receiving ACK packets from this router
B.The neighboring router starts receiving route updates from this router
C.The neighboring router is too busy to answer the query (generally caused by high CPUutilization)
D.The neighboring router is having memory problems and cannot allocate the memory to processthe query or build the reply packet

7.多項選擇題In computer networking a multicast address is an identifier for a group of hosts that have joined amulticast group. Multicast addressing can be used in the Link Layer (OSI Layer 2), such as Ethernet Multicast, as well as at the Internet Layer (OSI Layer 3) as IPv4 or IPv6 Multicast. Whichtwo descriptions are correct regarding multicast addressing?()

A、The first 23 bits of the multicast MAC address are 0x01-00-5E. This is a reserved value thatindicates a multicast application
B、The last 3 bytes (24 bits) of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast application
C、To calculate the Layer 2 multicast address, the host maps the last 23 bits of the IP address intothe last 24 bits of the MAC address. The high-order bit is set to 0
D、The first 3 bytes (24 bits) of the multicast MAC address are 0x01-00-5E. This is a reservedvalue that indicates a multicast application

8.單項選擇題Which IOS command would you use to find out which networks are routed by a particular OSPF process()

A.show ip ospf
B.show ip route
C.show ip protocols
D.show ip ospf database
E.None of the other alternatives apply

10.單項選擇題Which command would display OSPF parameters such as filters,default metric,maximum paths,and number of areas configured on a outer()

A.show ip protocol
B.show ip route
C.show ip ospfinterface
D.show ip ospf
E.show ip nterface
F.None of the other alternatives apply

最新試題

Which statement about PPPoA configuration is correct?()

題型:單項選擇題

Drag and drop the steps in the process for provisioning a cable modem to connect to a headendon the above to the below in the order defined by the DOCSIS standard.

題型:問答題

Network Topology Exhibit:Configuration Exhibit:NET(config)# access-list 112 deny icmp any any echo logNET(config)# access-list 112 deny imp any any redirect logNET(config)# access-list 112 deny icmp any any mask-request logNET(config)# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET(config)# interface Fa0/1NET(config-if)# ip access-group 112 inYou work as a network administrator at networkTut.com, study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However, the configurationis incorrect. On the basis of the information in the exhibit, which configuration option wouldcorrectly configure router NET?()

題型:單項選擇題

In computer security, AAA stands for authentication, authorization and accounting. Which optionabout the AAA authentication enable default group radius enable command is correct?()

題型:單項選擇題

Router NetworkTut is configured as shown below:Given the above configuration, which statement is true?()

題型:單項選擇題

Drag the IOS commands from the left that would be used to implement a GRE tunnel using the10.1.1.0.30 network on interface serial 0/0 to the correct target area on the right.

題型:問答題

Authentication is the process of determining if a user or identity is who they claim to be. Refer tothe exhibit. Which statement about the authentication process is correct?()

題型:單項選擇題

Which three statements accurately describe IOS Firewall configurations?()

題型:多項選擇題

Study the exhibit carefully. The Cisco IOS IPsec High Availability (IPsec HA) Enhancementsfeature provides an infrastructure for reliable and secure networks to provide transparent availability of the VPN gateways - that is, Cisco IOS Software-based routers. What are the twooptions that are used to provide High Availability IPsec?()

題型:多項選擇題

Drag the IPsec protocol description from the above to the correct protocol type on the below.(Notall descriptions will be used)Drag and Drop question, drag each item to its proper location.

題型:問答題