A.Each router has an identical link state database
B.External routes are imported into a separate link state database
C.Synchronization of link state databases is maintained via flooding of LSAs
D.Information in the link state database is used to build a routing table by calculating a shortest-path tree
E.By default， link state databases are refreshed every 10 minutes in the absence of topologychanges
您可能感興趣的試卷
你可能感興趣的試題
DR （Designated Router） is for environments where many routers on the same network such asEthernet. In the following presented network， all routers are reloaded simultaneously， and DR isselected as expected. What is the CK-RTC status？（）
A.2WAY/BDR
B.FULL/BDR
C.2WAY/DROTHER
D.2WAY/DR
E.FULL/DROTHER
F.FULL/DR
G.None of the other alternatives apply
A.Spanning Tree Protocol（STP）
B.Delay reduction
C.Hot Standby Routing Protocol（HSRP）
D.Dynamic routing protocols
E.Quality of Service（QoS）
F.Jitter management
Refer to the exhibit. On the basis of the information presented， which statement is true？（）
A.OSPF router 5.0.0.2 is an ABR
B.Network 6.0.0.0/8 was learned from an OSPF neighbor within the area
C.The default route is learned from an OSPF neighbor
D.A default route is configured on the local router
From the perspective of routerPG-1，what kind of router is the router with IP address 192.23.1.1（）
A.A peer router runningIBGP
B.A peer router runningEBGP
C.A community member running IBGP
D.A peer group member running IBGP
E.A peer group member running EBGP
A.The K-values do not match
B.The hold times do not match
C.The hello times do not match
D.The AS numbers do not match
A.debug eigrp packets
B.show ip eigrp traffic
C.show ip eigrp topology
D.show ip eigrp neighbors
A.Some query or reply packets are lost between the routers
B.The neighboring router starts receiving route updates from this router
C.A failure causes traffic on a link between two neighboring routers to flow in only one direction（unidirectional link）
D.The neighboring router stops receiving ACK packets from this router
Refer to the exhibit. EIGRP has been configured on routers R1 and R2. However， R1 does notshow R2 as a neighbor and does not accept routing updates from R2. What could be the cause ofthe problem？（）
A.The no auto-summary command has not been issued under the EIGRP process on bothrouters
B.Interface E0 on router R1 has not been configured with a secondary IP address of 10.1.2.1/24
C.EIGRP cannot exchange routing updates with a neighbor’s router interface that is configuredwith two IP addresses
D.EIGRP cannot form neighbor relationship and exchange routing updates with a secondaryaddress
Based on the above configuration, which of the following BGP statements would inject the 10.10.0.0/16 prefix into the BGP routing table（）
A.network 10.0.0.0
B.network 10.10.0.0 mask 255.255.0.0
C.network 10.10.10.1 mask 255.255.255.255
D.network 10.10.10.0 mask 255.255.255.0
E.network 10.0.0.0 mask 255.255.0.0
Study the exhibit below carefully：
If the configuration shown below is added to Router1， which three route entries will EIGRPadvertise to neighboring routers？（）
router eigrp 10
network 10.0.0.0
eigrp stub
A.192.168.20.0/24
B.10.1.2.0/24
C.10.1.1.0/24
D.10.1.3.0/24
E.10.0.0.0/8
最新試題
Which statement about PPPoA configuration is correct？（）
Drag the IPsec protocol description from the above to the correct protocol type on the below.（Notall descriptions will be used）Drag and Drop question， drag each item to its proper location.
Authentication is the process of determining if a user or identity is who they claim to be. Refer tothe exhibit. Which statement about the authentication process is correct？（）
IPSec VPN is a widely-acknowledged solution for enterprise network. Which three IPsec VPNstatements are true？（）
Which three statements accurately describe IOS Firewall configurations？（）
Drag the correct statements about MPLS-based VPN on the left to the boxes on the right.（Not allstatements will be used）
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.（Not all options will be used）
Study this exhibit carefully. What information can be derived from the SDM firewall configurationdisplayed？（）
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define？（）
Drag and drop each function on the above to the hybrid fiber-coaxial architecture component that itdescribes on the below.